2012 | 2011 | 2010 | 2009 | 2008 | 2007 | Release Archive | Subscribe to Releases
January 13, 2006
The focus at APEX will be a JOT Automation line, featuring a Bare Board Unstacker, a Laser Marker, and a Single Magazine Handler.
The J210-50 Bare Board Unstacker automatically feeds boards onto a production line and has a pass-through length of just 500mm (19.7'). The track height is adjustable from 750-1000mm (29.5'–39.4'), while a support mechanism relieves the load on the boards at the bottom of the stack.
The J502-22 Laser Marker is being shown in the US for the first time, having been premiered at Productronica in November. The YAG 1064nm laser can mark barcodes, 2D codes, text and graphics at up to 100 characters per second and it has a PCB transfer cycle time of just six seconds. Despite its small footprint, it offers a marking area of 100 x 100mm within a generous working area of 470 x 470mm.
The J215-33 Single Magazine Handler is ideal for high-mix, low-volume production and at APEX will feature a feed-out conveyor for unloading. The system offers an easy, no-program setup and the track height is adjustable between 900 and 950mm (35.4' – 37.4').
All of Elektrobit's JOT Automation material handling equipment is compatible with Lead-free production and will itself be manufactured from Lead-free components from July 2006.
The J401-11 'Tiny' Test Handler will also be receiving its US launch, shown in conjunction with new display tester software, able to test small LCD displays, keyboards and housings of electronics equipment. It is claimed to offer high accuracy display defect detection and high immunity to significant variations in illumination, part orientation and the display's protection tape.
Also on display will be the J501-41 Stand Alone Mini-Router, a cost-efficient stand alone desktop router for topside routing. Its small footprint offers flexibility for accurate, clean-cut routing in a range of production applications. The Production Test System for mobile phones offers hardware independence, supporting a wide selection of radio communication testers from major measurement equipment suppliers, and providing automation solutions for a variety of manufacturing environments, with a choice of manual, semi automated or fully automated handling.
Further information:
Americas:
Test
Dana Brown, Elektrobit Inc.
Tel: +1 (469) 831-8533
Automation Solutions
Brian Bagby, Elektrobit Inc.
Tel: +1 (469) 233-5411
1201 S. Belt Line Road, Suite C100,
Coppell, Texas 75019, USA
Europe:
Elektrobit Group Plc.
Tel: +358 40 344 2000
Fax: +358 8 570 1301
Email: group@elektrobit.com
Automaatiotie 1
FIN-90461 Oulunsalo, Finland
www.elektrobit.com
Asia:
Test and Automation Solutions
Nick Wang, Elektrobit Technologies Ltd.
No. 18, Hongda Road, Beijing Econ. and Tech. Develop. Area, Beijing 100176, China
Tel: +86 10 6787 0268
Fax: +86 (10) 6788 9681
About Elektrobit Group Plc.
Elektrobit Group's business idea is to improve the competitiveness of the customer's product and production by assuming total or partial responsibility for product development, product design and the implementation of production and testing solutions.
Elektrobit Group's main customer groups are the telecommunications, electronics and automotive industries. The company's objective is to be the leading supplier of productization solutions within this industry and a leading technology partner behind the best brands. The Group operates in 15 countries and employs approximately 1600 experts within its field, including 1100 R&D engineers. The Group recorded pro forma net sales 203 million euros in 2004.
January 13, 2006
Print this releaseElektrobit to Show New Automation Equipment at APEX
Elektrobit Group Plc. will be exhibiting a wide range of automation equipment at APEX (8–10 February 2006) in Anaheim.The focus at APEX will be a JOT Automation line, featuring a Bare Board Unstacker, a Laser Marker, and a Single Magazine Handler.
The J210-50 Bare Board Unstacker automatically feeds boards onto a production line and has a pass-through length of just 500mm (19.7'). The track height is adjustable from 750-1000mm (29.5'–39.4'), while a support mechanism relieves the load on the boards at the bottom of the stack.
The J502-22 Laser Marker is being shown in the US for the first time, having been premiered at Productronica in November. The YAG 1064nm laser can mark barcodes, 2D codes, text and graphics at up to 100 characters per second and it has a PCB transfer cycle time of just six seconds. Despite its small footprint, it offers a marking area of 100 x 100mm within a generous working area of 470 x 470mm.
The J215-33 Single Magazine Handler is ideal for high-mix, low-volume production and at APEX will feature a feed-out conveyor for unloading. The system offers an easy, no-program setup and the track height is adjustable between 900 and 950mm (35.4' – 37.4').
All of Elektrobit's JOT Automation material handling equipment is compatible with Lead-free production and will itself be manufactured from Lead-free components from July 2006.
The J401-11 'Tiny' Test Handler will also be receiving its US launch, shown in conjunction with new display tester software, able to test small LCD displays, keyboards and housings of electronics equipment. It is claimed to offer high accuracy display defect detection and high immunity to significant variations in illumination, part orientation and the display's protection tape.
Also on display will be the J501-41 Stand Alone Mini-Router, a cost-efficient stand alone desktop router for topside routing. Its small footprint offers flexibility for accurate, clean-cut routing in a range of production applications. The Production Test System for mobile phones offers hardware independence, supporting a wide selection of radio communication testers from major measurement equipment suppliers, and providing automation solutions for a variety of manufacturing environments, with a choice of manual, semi automated or fully automated handling.
Further information:
Americas:
Test
Dana Brown, Elektrobit Inc.
Tel: +1 (469) 831-8533
Automation Solutions
Brian Bagby, Elektrobit Inc.
Tel: +1 (469) 233-5411
1201 S. Belt Line Road, Suite C100,
Coppell, Texas 75019, USA
Europe:
Elektrobit Group Plc.
Tel: +358 40 344 2000
Fax: +358 8 570 1301
Email: group@elektrobit.com
Automaatiotie 1
FIN-90461 Oulunsalo, Finland
www.elektrobit.com
Asia:
Test and Automation Solutions
Nick Wang, Elektrobit Technologies Ltd.
No. 18, Hongda Road, Beijing Econ. and Tech. Develop. Area, Beijing 100176, China
Tel: +86 10 6787 0268
Fax: +86 (10) 6788 9681
About Elektrobit Group Plc.
Elektrobit Group's business idea is to improve the competitiveness of the customer's product and production by assuming total or partial responsibility for product development, product design and the implementation of production and testing solutions.
Elektrobit Group's main customer groups are the telecommunications, electronics and automotive industries. The company's objective is to be the leading supplier of productization solutions within this industry and a leading technology partner behind the best brands. The Group operates in 15 countries and employs approximately 1600 experts within its field, including 1100 R&D engineers. The Group recorded pro forma net sales 203 million euros in 2004.